| |
|
| |
|
| |
We provide you with a checklist and follow up on
all work completed and a written report on the condition of your
scale with recommendations for upgrade where applicable and replacement
of any parts that could cause problems in the future.
Regularly scheduled scale calibration is especially important.
Inaccurate scales can result in higher costs and loss of funds
(see our scales chart)
depending on the degree of inaccuracy and the length of time since
the last
calibration.
The following points are services rendered and procedures followed
for inspection and maintenance on various types of scale equipment. |
| |
|
| |
1) Weighbridge & Foundation |
| |
| |
|
 |
Visually inspect scale foundations for rigidity
and groute under stands
|
|
Visually inspect clearances around weighbridges |
|
Visually inspect weighbridge steel for corrosion, cracks,
and broken bolts |
|
Visually inspect condition of weighbridge deck |
|
Check girder chair bolts |
|
Pressure wash, clean, re-grease, adjust platform bumper bolts |
|
Sandblasting if needed |
|
| |
|
| |
|
| |
|
| |
2) Electronic & Mechanical
Scales |
| |
| |
|
|
Check and inspect for wear and corrosion |
|
Clean and inspect load cell for physical wear and corrosion |
|
Check loadcell cable for abrasion or damage |
|
Check proper alignment for mounting assembly suspension parts |
|
Check conduits |
|
Check loadcell and splices for moisture and corrosion |
|
Check balance box for moisture and corrosion |
|
Re-grease and re-assemble load cell mouting assemblies |
|
Check and inspect main lever, pivots and bearing, etc. |
|
| |
|
| |
|
| |
|
| |
3) Digital Weight Indicator |
| |
| |
|
|
Check all digit display segments are operating |
|
Check loadcells input cable entrance to indicator for abrasion
of cable damages |
|
Check digital indicator on simulator to verify operation of
indicator |
|
| |
|
| |
|
| |
|
| |
4) Testing and Calibration |
| |
| |
|
|
Make section adjustments as required to meet scale
calibration with government weights and measures tolerances |
|
Check digital indicator and verify scale return to zero |
|
Test and calibrate scale with strain load and certified weight
(both directions) in order to meet government specification |
|
| |
|
| |
|
| |
|
| |
5) Additional Services |
| |
| |
|
|
For scale calibration our truck and technician
are available 24 hours |
|
Welding, pressure washing and sandblasting where required |
|
Removal of excess mud and debris from the the scale assembly
and weighbridges |
|
Manufacturing components including scale foundations, deck,
catwalk, bullrails, handrails etc... |
|
| |
|
| |
|
| |
|
